MASUDA.LMT06-25P06N.NA “3.5 MPa LINE FILTER FOR RETURN OIL LINE BALLAST VALVE SYSTEM
TYPE: LMT06-25P06N PT3/4 25µ，MODEL LMT 06 25PO6N
MAX PR. 3.5 MPa/ 35 Kgf/CM2
FLOW RATE: 60 LTR/MIN
PLEASE REFER DRAW NO. 0706-049”

MACGREGOR.NA.72110-05500 / d-100 O RING
MACGREGOR.NA.72110-05500 / d- 100 DUST SEAL
MACGREGOR.NA.72110-03400/ d- 125 O RING
MACGREGOR.NA.72110-03400 / d- 125 BACK UP RING

MACGREGOR.NA.79923-35101-C1 HATCH COVER WHEEL，WHEEL ID-50mm/ OD-90 mm(PLEASE SEE ATTACHED DR GIVEN BELOW)
MACGREGOR.NA.79922-35105-C5 LOCK NUT
MACGREGOR.NA.79922-35104-C4 COLLAR
MACGREGOR.NA.79922-35103-C3 COVER
MACGREGOR.NA.79922-35102-C2 SHAFT
MACGREGOR.NA.C11 SET SCREW (M8 x L10)
MACGREGOR.NA.C10 BOLT (M12x L40 x S30)
MACGREGOR.NA.C6 SPRING WASHER (M12)
MACGREGOR.NA.79922-35106-C6 PACKING (T=5) NEOPREPENE

OVAL.NPI 45B.NA “VALVE POSITION INDICATOR MAKER : OVAL
NAKAKITA SEISAKUSHO CO LTD
TYPE: NPI 45B MAX PRESSURE 140 Kgf/cm2 HYDORO C PRESSURE 210 Kgf/cm2
MODEL NPI45”

SONDEX.JWP-26-C80B.62312-62 SALTINITY CONTROLLER FOR FWG

JIANGSU JIAOYAN MARINE .NA.LB-037 “LIFTING WIRE FOR LIFE BOAT
MATERIAL: STAINLESS STEEL/FORGED STEEL;
FORE LIFTING WIRE-DIAM: 16MM X L- 5240MM
AFT LIFTING WIRE-DIAM: 16MM X L- 1430MM
LIFTING RING: SCM435H;FULL SET
=================
2 SETS – FOR RENEWAL;
2 SETS – FOR SPAIRE AS PER COMPANY POLICY”
JIANGSU JIAOYAN MARINE .NA.RB-023 “LIFTING WIRE FOR RESCUE BOAT –
MATERIAL: STAINLESS STEEL/FORGED STEEL;
FORE LIFTING WIRE – DIAM: 12MM X L-1500MM AFT LIFTING WIRE – DIAM: 12MM X L-1500MM
LIFTING RING: S45CH;FULL SET
===============
1 SET – FOR RENEWAL;
1 SET – FOR SPAIRE AS PER COMPANY POLICY”

JIANGSU YUANWANG INSTRUMENT.UQK-01-C.216326 “FLOAT LEVEL CONTROLLER (SENSOR) OF HOT WELL UNIT
NJ08T00102
UQK-01-C
NOMINAL PRESSURE – 1 MPa
ENCLOSURE IP-66
CONTACT RATING AC 230V / 1,5A
CCS APP’L No. NJ08T00102
No. 216326
JIANGSUYANWANG INSTRUMENT CO, LTD.”

TDI TURBOSTART TWO TM.45M.1P-24775 CONTROLLER MODULE
TDI TURBOSTART TWO TM.45M.2-25299 SOLENOID VALVE

COMPLETE EJECTOR SFD-13 DN80
SONDEX A/S.SFD-13/20.401360100001 COMPLETE EJECTOR SFD-13 DN80,
SONDEX A/S.SFD-13/20.101352100001 “GASKETS FOR CONDENSER/EVAPORATOR
PLATES”
SONDEX A/S.SFD-13/20.40134358103430 PLATE NO. 3 FOR CONDENSER/EVAPORATOR
SONDEX A/S.SFD-13/20.40134358103420 PLATE NO.2 FOR CONDENSER/EVAPORATOR