“FOR SEWAGE PUMP
BUILDER NANIWA PUMP MANUFACTURING CO., LTD.
TYPE AE1E 200-1D
BUILDING YEAR 2010
SERIAL NO. A8 F 4764
LOCATION:ENGINE ROOM
OPERATING SYSTEM:BILGE, SLUDGE AND WASTE OIL SYSTEM
PUMP DESIGN SCREW
PUMPED MEDIUM SEWAGE
CAPACITY [M3/H] 10.00
DISCHARGE PRESSURE [BAR G] 4.00” ANGULAR-CONTACT BALL BEARING NANIWA.AE1E200-1D.104
“FOR SEWAGE PUMP
BUILDER NANIWA PUMP MANUFACTURING CO., LTD.
TYPE AE1E 200-1D
BUILDING YEAR 2010
SERIAL NO. A8 F 4764
LOCATION:ENGINE ROOM
OPERATING SYSTEM:BILGE, SLUDGE AND WASTE OIL SYSTEM
PUMP DESIGN SCREW
PUMPED MEDIUM SEWAGE
CAPACITY [M3/H] 10.00
DISCHARGE PRESSURE [BAR G] 4.00” BEARING COVER NANIWA.AE1E200-1D.131
“FOR SEWAGE PUMP
BUILDER NANIWA PUMP MANUFACTURING CO., LTD.
TYPE AE1E 200-1D
BUILDING YEAR 2010
SERIAL NO. A8 F 4764
LOCATION:ENGINE ROOM
OPERATING SYSTEM:BILGE, SLUDGE AND WASTE OIL SYSTEM
PUMP DESIGN SCREW
PUMPED MEDIUM SEWAGE
CAPACITY [M3/H] 10.00
DISCHARGE PRESSURE [BAR G] 4.00” GROOVE BALL BEARING NANIWA.AE1E200-1D.103
“FOR SEWAGE PUMP
BUILDER NANIWA PUMP MANUFACTURING CO., LTD.
TYPE AE1E 200-1D
BUILDING YEAR 2010
SERIAL NO. A8 F 4764
LOCATION:ENGINE ROOM
OPERATING SYSTEM:BILGE, SLUDGE AND WASTE OIL SYSTEM
PUMP DESIGN SCREW
PUMPED MEDIUM SEWAGE
CAPACITY [M3/H] 10.00
DISCHARGE PRESSURE [BAR G] 4.00” JOINT BUSH NANIWA.AE1E200-1D.302
“FOR SEWAGE PUMP
BUILDER NANIWA PUMP MANUFACTURING CO., LTD.
TYPE AE1E 200-1D
BUILDING YEAR 2010
SERIAL NO. A8 F 4764
LOCATION:ENGINE ROOM
OPERATING SYSTEM:BILGE, SLUDGE AND WASTE OIL SYSTEM
PUMP DESIGN SCREW
PUMPED MEDIUM SEWAGE
CAPACITY [M3/H] 10.00
DISCHARGE PRESSURE [BAR G] 4.00” MECHANICAL SEAL NANIWA.AE1E200-1D.219
“FOR SEWAGE PUMP
BUILDER NANIWA PUMP MANUFACTURING CO., LTD.
TYPE AE1E 200-1D
BUILDING YEAR 2010
SERIAL NO. A8 F 4764
LOCATION:ENGINE ROOM
OPERATING SYSTEM:BILGE, SLUDGE AND WASTE OIL SYSTEM
PUMP DESIGN SCREW
PUMPED MEDIUM SEWAGE
CAPACITY [M3/H] 10.00
DISCHARGE PRESSURE [BAR G] 4.00” O-RING NANIWA.AE1E200-1D.235
“FOR SEWAGE PUMP
BUILDER NANIWA PUMP MANUFACTURING CO., LTD.
TYPE AE1E 200-1D
BUILDING YEAR 2010
SERIAL NO. A8 F 4764
LOCATION:ENGINE ROOM
OPERATING SYSTEM:BILGE, SLUDGE AND WASTE OIL SYSTEM
PUMP DESIGN SCREW
PUMPED MEDIUM SEWAGE
CAPACITY [M3/H] 10.00
DISCHARGE PRESSURE [BAR G] 4.00” O-RING NANIWA.AE1E200-1D.218
“FOR SEWAGE PUMP
BUILDER NANIWA PUMP MANUFACTURING CO., LTD.
TYPE AE1E 200-1D
BUILDING YEAR 2010
SERIAL NO. A8 F 4764
LOCATION:ENGINE ROOM
OPERATING SYSTEM:BILGE, SLUDGE AND WASTE OIL SYSTEM
PUMP DESIGN SCREW
PUMPED MEDIUM SEWAGE
CAPACITY [M3/H] 10.00
DISCHARGE PRESSURE [BAR G] 4.00” O-RING NANIWA.AE1E200-1D.115
“FOR SEWAGE PUMP
BUILDER NANIWA PUMP MANUFACTURING CO., LTD.
TYPE AE1E 200-1D
BUILDING YEAR 2010
SERIAL NO. A8 F 4764
LOCATION:ENGINE ROOM
OPERATING SYSTEM:BILGE, SLUDGE AND WASTE OIL SYSTEM
PUMP DESIGN SCREW
PUMPED MEDIUM SEWAGE
CAPACITY [M3/H] 10.00
DISCHARGE PRESSURE [BAR G] 4.00” SHAFT SEAL RING NANIWA.AE1E200-1D.112
“FOR SEWAGE PUMP
BUILDER NANIWA PUMP MANUFACTURING CO., LTD.
TYPE AE1E 200-1D
BUILDING YEAR 2010
SERIAL NO. A8 F 4764
LOCATION:ENGINE ROOM
OPERATING SYSTEM:BILGE, SLUDGE AND WASTE OIL SYSTEM
PUMP DESIGN SCREW
PUMPED MEDIUM SEWAGE
CAPACITY [M3/H] 10.00
DISCHARGE PRESSURE [BAR G] 4.00” SHAFT SEAL RING NANIWA.AE1E200-1D.232
“FOR SEWAGE PUMP
BUILDER NANIWA PUMP MANUFACTURING CO., LTD.
TYPE AE1E 200-1D
BUILDING YEAR 2010
SERIAL NO. A8 F 4764
LOCATION:ENGINE ROOM
OPERATING SYSTEM:BILGE, SLUDGE AND WASTE OIL SYSTEM
PUMP DESIGN SCREW
PUMPED MEDIUM SEWAGE
CAPACITY [M3/H] 10.00
DISCHARGE PRESSURE [BAR G] 4.00” STATOR NANIWA.AE1E200-1D.402
“FOR SEWAGE PUMP
BUILDER NANIWA PUMP MANUFACTURING CO., LTD.
TYPE AE1E 200-1D
BUILDING YEAR 2010
SERIAL NO. A8 F 4764
LOCATION:ENGINE ROOM
OPERATING SYSTEM:BILGE, SLUDGE AND WASTE OIL SYSTEM
PUMP DESIGN SCREW
PUMPED MEDIUM SEWAGE
CAPACITY [M3/H] 10.00
DISCHARGE PRESSURE [BAR G] 4.00” STATOR GASKET OUTLET SIDE NANIWA.AE1E200-1D.403
“FOR SEWAGE PUMP
BUILDER NANIWA PUMP MANUFACTURING CO., LTD.
TYPE AE1E 200-1D
BUILDING YEAR 2010
SERIAL NO. A8 F 4764
LOCATION:ENGINE ROOM
OPERATING SYSTEM:BILGE, SLUDGE AND WASTE OIL SYSTEM
PUMP DESIGN SCREW
PUMPED MEDIUM SEWAGE
CAPACITY [M3/H] 10.00
DISCHARGE PRESSURE [BAR G] 4.00” STATOR GASKET SUCTION SIDE NANIWA.AE1E200-1D.404
“FOR SEWAGE PUMP
BUILDER NANIWA PUMP MANUFACTURING CO., LTD.
TYPE AE1E 200-1D
BUILDING YEAR 2010
SERIAL NO. A8 F 4764
LOCATION:ENGINE ROOM
OPERATING SYSTEM:BILGE, SLUDGE AND WASTE OIL SYSTEM
PUMP DESIGN SCREW
PUMPED MEDIUM SEWAGE
CAPACITY [M3/H] 10.00
DISCHARGE PRESSURE [BAR G] 4.00” STUFFING BOX PACKING NANIWA.AE1E200-1D.207